Direct Vent
Natural Gas Model Number
LP Gas Model Number
Rated Gas Input(BTUs/Hr.)
11,000 (minimum)
180,000 (maximum)
11,000 (minimum)
180,000 (maximum) Modulating
Dimensions (Inches)
13-7/8 (W) x 23-5/8 (H) x 8-7/8 (D) (Outdoor)
13-7/8 (W) x 25-5/8 (H) x 9-7/8 (D) (Direct Vent)
Empty Net Weight (lbs.)
Working Water Pressure
14 psi (minimum); 150 psi (maximum)
Water Flow Rate
0.44 GPM (minimum) 8.4 GPM (maximum)
Gas Connection
3/4" NPT Female (With Supplied Gas Shutoff Valve)
Water Connection
3/4" NPT Male
Vent Size
N/A (Outdoor Installation)
3"/5" Concentric Category III stainless steel venting required
Efficiency Rating
Energy Factor
Electrical Rating
120 VAC/60 Hz, Less than 2 Amps

Factory-set maximum temperature is 120 degrees F
For installations above 3,280 feet, the high altitude DIP Switch Adjustment is required. Consult the factory or your supplier for details.
•For commercial use: need to convert by the commercial chip.

The ICAD is a sophisticated system that monitors and optimizes combustion in the firing chamber, providing protection against Carbon Monoxide.
Learn more.
Sae up to $300 Home Energy Improvement Tax Credit
Everyone claims that their product is greener but few take the next step. Paloma is taking that step; we're seeking a solution to a serious and difficult issue. Paloma is ready to meet the challenge.
Learn more.

With any water heater, the trick is to make certain that you don't run out of hot water. View a complete comparison of features and benefits. Learn more.
Copyright © 2005 - 2008 Paloma Industries, Inc. All rights reserved. | Privacy | Site Map