Trying to understand when to select a Paloma Legacy Tankless instead of a solution from the contemporary Digital Tankless line?

Legacy Tankless series have all been proven with years of use, and are ready to stand up to the rigors of difficult conditions where a Digital Tankless might not dare to tread.

If you can say YES to any of the following, you may be a candidate for ownership of a Paloma Legacy Tankless:

Low water pressure, from a well, for example
No electricity, or you want it to stand up to power outages.
Your installation will involve a long vertical vent run (unlike Digital Tankless, Legacy units are atmospherically vented using less expensive, galvanized "B" vent).

Legacy Tankless come in three sizes, with the Legacy 24 the optimal model for whole-house applications.

Expect winter performance of 1 to 2 full showers, depending on your location, with a 1-hour bath-filling capability of more than 190 gallons.

Modulating Unit
Turn on your hot water faucet and water is heated instantly as it flows through the heating coils. The Paloma modulating control automatically adjusts the flame to the water flow you select. Low water demand equals low flame. Large water demand equals high flame. And Paloma's burners shut off automatically as soon as you turn off the faucet.

Paloma produces hot water only when and as much as you need. That's why you can save energy and money.

High Technology and Quality Design
Wall-mounted Paloma Tankless water heaters are built to perform efficiently with very little maintenance. First-class materials include a copper heat exchanger and combustion chamber, brass controls, stainless steel burners, and a hard-baked porcelain exterior. Palomas are easy to service and all parts are easy to replace.

Freeze Protection Kit
A thermostatically controlled kit keeps the water control body assembly and the water control case assemblies protected against freezing down to conditions of minus 5 degrees F including windchill factor.  Unlike the freeze protection in the Digital Tankless Series, this kit does not protect against freezing in the heat exchanger.

*This Guide indicates Legacy 24 performance at the coldest point of the year at water pressure of 12.9 psi and above. A standard shower is 2.5 GPM at 104 degrees F. In order to get the full GPM and shower performance with the Legacy series, it is necessary to heat water at the HOT setting, and then mix with cold water.  This will create scalding conditions in your hot water. USE WITH CAUTION! Check with your water supplier for actual local conditions.

Endless hot water on demand
Mechanical modulation to keep output temperatures consistent, even if you change the flow at the tap.
Energy efficiency - 80% more efficient than tank-type water heaters
A knob controller to set water temperature rise from 60 to 100 degrees above inlet temperature.
A magnetic safety valve to stop gas flow when the pilot is extinguished.
Built-in Piezo ignition to easily light pilot flame
Complete Product Features

Full performance at water pressure of just 12.9 psi. Minimum working pressure of just 2.4 psi.
Natural and LP gas
Indoor Model
High-Altitude Models
Atmospherically Vented using "B" vent
Complete Product Specifications

Residential Warranty
5-Year Limited Warranty on Heat Exchanger
3-Year Limited Warranty on Parts

The ICAD is a sophisticated system that monitors and optimizes combustion in the firing chamber, providing protection against Carbon Monoxide.
Learn more.
Sae up to $300 Home Energy Improvement Tax Credit
Everyone claims that their product is greener but few take the next step. Paloma is taking that step; we're seeking a solution to a serious and difficult issue. Paloma is ready to meet the challenge.
Learn more.

With any water heater, the trick is to make certain that you don't run out of hot water. View a complete comparison of features and benefits. Learn more.
Copyright © 2005 - 2008 Paloma Industries, Inc. All rights reserved. | Privacy | Site Map